Context

A Gallium rendering context encapsulates the state which effects 3D rendering such as blend state, depth/stencil state, texture samplers, etc.

Note that resource/texture allocation is not per-context but per-screen.

Methods

CSO State

All Constant State Object (CSO) state is created, bound, and destroyed, with triplets of methods that all follow a specific naming scheme. For example, create_blend_state, bind_blend_state, and destroy_blend_state.

CSO objects handled by the context object:

  • Blend: *_blend_state
  • Sampler: Texture sampler states are bound separately for fragment, vertex, geometry and compute shaders with the bind_sampler_states function. The start and num_samplers parameters indicate a range of samplers to change. NOTE: at this time, start is always zero and the CSO module will always replace all samplers at once (no sub-ranges). This may change in the future.
  • Rasterizer: *_rasterizer_state
  • Depth, Stencil, & Alpha: *_depth_stencil_alpha_state
  • Shader: These are create, bind and destroy methods for vertex, fragment and geometry shaders.
  • Vertex Elements: *_vertex_elements_state

Resource Binding State

This state describes how resources in various flavours (textures, buffers, surfaces) are bound to the driver.

  • set_constant_buffer sets a constant buffer to be used for a given shader type. index is used to indicate which buffer to set (some apis may allow multiple ones to be set, and binding a specific one later, though drivers are mostly restricted to the first one right now).
  • set_framebuffer_state
  • set_vertex_buffers

Non-CSO State

These pieces of state are too small, variable, and/or trivial to have CSO objects. They all follow simple, one-method binding calls, e.g. set_blend_color.

  • set_stencil_ref sets the stencil front and back reference values which are used as comparison values in stencil test.
  • set_blend_color
  • set_sample_mask
  • set_min_samples sets the minimum number of samples that must be run.
  • set_clip_state
  • set_polygon_stipple
  • set_scissor_states sets the bounds for the scissor test, which culls pixels before blending to render targets. If the Rasterizer does not have the scissor test enabled, then the scissor bounds never need to be set since they will not be used. Note that scissor xmin and ymin are inclusive, but xmax and ymax are exclusive. The inclusive ranges in x and y would be [xmin..xmax-1] and [ymin..ymax-1]. The number of scissors should be the same as the number of set viewports and can be up to PIPE_MAX_VIEWPORTS.
  • set_viewport_states
  • set_window_rectangles sets the window rectangles to be used for rendering, as defined by GL_EXT_window_rectangles. There are two modes - include and exclude, which define whether the supplied rectangles are to be used for including fragments or excluding them. All of the rectangles are ORed together, so in exclude mode, any fragment inside any rectangle would be culled, while in include mode, any fragment outside all rectangles would be culled. xmin/ymin are inclusive, while xmax/ymax are exclusive (same as scissor states above). Note that this only applies to draws, not clears or blits. (Blits have their own way to pass the requisite rectangles in.)
  • set_tess_state configures the default tessellation parameters:
    • default_outer_level is the default value for the outer tessellation levels. This corresponds to GL’s PATCH_DEFAULT_OUTER_LEVEL.
    • default_inner_level is the default value for the inner tessellation levels. This corresponds to GL’s PATCH_DEFAULT_INNER_LEVEL.
  • set_debug_callback sets the callback to be used for reporting various debug messages, eventually reported via KHR_debug and similar mechanisms.

Samplers

pipe_sampler_state objects control how textures are sampled (coordinate wrap modes, interpolation modes, etc). Note that samplers are not used for texture buffer objects. That is, pipe_context::bind_sampler_views() will not bind a sampler if the corresponding sampler view refers to a PIPE_BUFFER resource.

Sampler Views

These are the means to bind textures to shader stages. To create one, specify its format, swizzle and LOD range in sampler view template.

If texture format is different than template format, it is said the texture is being cast to another format. Casting can be done only between compatible formats, that is formats that have matching component order and sizes.

Swizzle fields specify the way in which fetched texel components are placed in the result register. For example, swizzle_r specifies what is going to be placed in first component of result register.

The first_level and last_level fields of sampler view template specify the LOD range the texture is going to be constrained to. Note that these values are in addition to the respective min_lod, max_lod values in the pipe_sampler_state (that is if min_lod is 2.0, and first_level 3, the first mip level used for sampling from the resource is effectively the fifth).

The first_layer and last_layer fields specify the layer range the texture is going to be constrained to. Similar to the LOD range, this is added to the array index which is used for sampling.

  • set_sampler_views binds an array of sampler views to a shader stage. Every binding point acquires a reference to a respective sampler view and releases a reference to the previous sampler view.
  • create_sampler_view creates a new sampler view. texture is associated with the sampler view which results in sampler view holding a reference to the texture. Format specified in template must be compatible with texture format.
  • sampler_view_destroy destroys a sampler view and releases its reference to associated texture.

Shader Resources

Shader resources are textures or buffers that may be read or written from a shader without an associated sampler. This means that they have no support for floating point coordinates, address wrap modes or filtering.

There are 2 types of shader resources: buffers and images.

Buffers are specified using the set_shader_buffers method.

Images are specified using the set_shader_images method. When binding images, the level, first_layer and last_layer pipe_image_view fields specify the mipmap level and the range of layers the image will be constrained to.

Surfaces

These are the means to use resources as color render targets or depthstencil attachments. To create one, specify the mip level, the range of layers, and the bind flags (either PIPE_BIND_DEPTH_STENCIL or PIPE_BIND_RENDER_TARGET). Note that layer values are in addition to what is indicated by the geometry shader output variable XXX_FIXME (that is if first_layer is 3 and geometry shader indicates index 2, the 5th layer of the resource will be used). These first_layer and last_layer parameters will only be used for 1d array, 2d array, cube, and 3d textures otherwise they are 0.

  • create_surface creates a new surface.
  • surface_destroy destroys a surface and releases its reference to the associated resource.

Stream output targets

Stream output, also known as transform feedback, allows writing the primitives produced by the vertex pipeline to buffers. This is done after the geometry shader or vertex shader if no geometry shader is present.

The stream output targets are views into buffer resources which can be bound as stream outputs and specify a memory range where it’s valid to write primitives. The pipe driver must implement memory protection such that any primitives written outside of the specified memory range are discarded.

Two stream output targets can use the same resource at the same time, but with a disjoint memory range.

Additionally, the stream output target internally maintains the offset into the buffer which is incremented everytime something is written to it. The internal offset is equal to how much data has already been written. It can be stored in device memory and the CPU actually doesn’t have to query it.

The stream output target can be used in a draw command to provide the vertex count. The vertex count is derived from the internal offset discussed above.

  • create_stream_output_target create a new target.
  • stream_output_target_destroy destroys a target. Users of this should use pipe_so_target_reference instead.
  • set_stream_output_targets binds stream output targets. The parameter offset is an array which specifies the internal offset of the buffer. The internal offset is, besides writing, used for reading the data during the draw_auto stage, i.e. it specifies how much data there is in the buffer for the purposes of the draw_auto stage. -1 means the buffer should be appended to, and everything else sets the internal offset.

NOTE: The currently-bound vertex or geometry shader must be compiled with the properly-filled-in structure pipe_stream_output_info describing which outputs should be written to buffers and how. The structure is part of pipe_shader_state.

Clearing

Clear is one of the most difficult concepts to nail down to a single interface (due to both different requirements from APIs and also driver/hw specific differences).

clear initializes some or all of the surfaces currently bound to the framebuffer to particular RGBA, depth, or stencil values. Currently, this does not take into account color or stencil write masks (as used by GL), and always clears the whole surfaces (no scissoring as used by GL clear or explicit rectangles like d3d9 uses). It can, however, also clear only depth or stencil in a combined depth/stencil surface. If a surface includes several layers then all layers will be cleared.

clear_render_target clears a single color rendertarget with the specified color value. While it is only possible to clear one surface at a time (which can include several layers), this surface need not be bound to the framebuffer. If render_condition_enabled is false, any current rendering condition is ignored and the clear will be unconditional.

clear_depth_stencil clears a single depth, stencil or depth/stencil surface with the specified depth and stencil values (for combined depth/stencil buffers, it is also possible to only clear one or the other part). While it is only possible to clear one surface at a time (which can include several layers), this surface need not be bound to the framebuffer. If render_condition_enabled is false, any current rendering condition is ignored and the clear will be unconditional.

clear_texture clears a non-PIPE_BUFFER resource’s specified level and bounding box with a clear value provided in that resource’s native format.

clear_buffer clears a PIPE_BUFFER resource with the specified clear value (which may be multiple bytes in length). Logically this is a memset with a multi-byte element value starting at offset bytes from resource start, going for size bytes. It is guaranteed that size % clear_value_size == 0.

Uploading

For simple single-use uploads, use pipe_context::stream_uploader or pipe_context::const_uploader. The latter should be used for uploading constants, while the former should be used for uploading everything else. PIPE_USAGE_STREAM is implied in both cases, so don’t use the uploaders for static allocations.

Usage:

Call u_upload_alloc or u_upload_data as many times as you want. After you are done, call u_upload_unmap. If the driver doesn’t support persistent mappings, u_upload_unmap makes sure the previously mapped memory is unmapped.

Gotchas: - Always fill the memory immediately after u_upload_alloc. Any following call to u_upload_alloc and u_upload_data can unmap memory returned by previous u_upload_alloc. - Don’t interleave calls using stream_uploader and const_uploader. If you use one of them, do the upload, unmap, and only then can you use the other one.

Drawing

draw_vbo draws a specified primitive. The primitive mode and other properties are described by pipe_draw_info.

The mode, start, and count fields of pipe_draw_info specify the the mode of the primitive and the vertices to be fetched, in the range between start to start``+``count-1, inclusive.

Every instance with instanceID in the range between start_instance and start_instance``+``instance_count-1, inclusive, will be drawn.

If index_size != 0, all vertex indices will be looked up from the index buffer.

In indexed draw, min_index and max_index respectively provide a lower and upper bound of the indices contained in the index buffer inside the range between start to start``+``count-1. This allows the driver to determine which subset of vertices will be referenced during te draw call without having to scan the index buffer. Providing a over-estimation of the the true bounds, for example, a min_index and max_index of 0 and 0xffffffff respectively, must give exactly the same rendering, albeit with less performance due to unreferenced vertex buffers being unnecessarily DMA’ed or processed. Providing a underestimation of the true bounds will result in undefined behavior, but should not result in program or system failure.

In case of non-indexed draw, min_index should be set to start and max_index should be set to start``+``count-1.

index_bias is a value added to every vertex index after lookup and before fetching vertex attributes.

When drawing indexed primitives, the primitive restart index can be used to draw disjoint primitive strips. For example, several separate line strips can be drawn by designating a special index value as the restart index. The primitive_restart flag enables/disables this feature. The restart_index field specifies the restart index value.

When primitive restart is in use, array indexes are compared to the restart index before adding the index_bias offset.

If a given vertex element has instance_divisor set to 0, it is said it contains per-vertex data and effective vertex attribute address needs to be recalculated for every index.

attribAddr = stride * index + src_offset

If a given vertex element has instance_divisor set to non-zero, it is said it contains per-instance data and effective vertex attribute address needs to recalculated for every instance_divisor-th instance.

attribAddr = stride * instanceID / instance_divisor + src_offset

In the above formulas, src_offset is taken from the given vertex element and stride is taken from a vertex buffer associated with the given vertex element.

The calculated attribAddr is used as an offset into the vertex buffer to fetch the attribute data.

The value of instanceID can be read in a vertex shader through a system value register declared with INSTANCEID semantic name.

Queries

Queries gather some statistic from the 3D pipeline over one or more draws. Queries may be nested, though not all state trackers exercise this.

Queries can be created with create_query and deleted with destroy_query. To start a query, use begin_query, and when finished, use end_query to end the query.

create_query takes a query type (PIPE_QUERY_*), as well as an index, which is the vertex stream for PIPE_QUERY_PRIMITIVES_GENERATED and PIPE_QUERY_PRIMITIVES_EMITTED, and allocates a query structure.

begin_query will clear/reset previous query results.

get_query_result is used to retrieve the results of a query. If the wait parameter is TRUE, then the get_query_result call will block until the results of the query are ready (and TRUE will be returned). Otherwise, if the wait parameter is FALSE, the call will not block and the return value will be TRUE if the query has completed or FALSE otherwise.

get_query_result_resource is used to store the result of a query into a resource without synchronizing with the CPU. This write will optionally wait for the query to complete, and will optionally write whether the value is available instead of the value itself.

set_active_query_state Set whether all current non-driver queries except TIME_ELAPSED are active or paused.

The interface currently includes the following types of queries:

PIPE_QUERY_OCCLUSION_COUNTER counts the number of fragments which are written to the framebuffer without being culled by Depth, Stencil, & Alpha testing or shader KILL instructions. The result is an unsigned 64-bit integer. This query can be used with render_condition.

In cases where a boolean result of an occlusion query is enough, PIPE_QUERY_OCCLUSION_PREDICATE should be used. It is just like PIPE_QUERY_OCCLUSION_COUNTER except that the result is a boolean value of FALSE for cases where COUNTER would result in 0 and TRUE for all other cases. This query can be used with render_condition.

In cases where a conservative approximation of an occlusion query is enough, PIPE_QUERY_OCCLUSION_PREDICATE_CONSERVATIVE should be used. It behaves like PIPE_QUERY_OCCLUSION_PREDICATE, except that it may return TRUE in additional, implementation-dependent cases. This query can be used with render_condition.

PIPE_QUERY_TIME_ELAPSED returns the amount of time, in nanoseconds, the context takes to perform operations. The result is an unsigned 64-bit integer.

PIPE_QUERY_TIMESTAMP returns a device/driver internal timestamp, scaled to nanoseconds, recorded after all commands issued prior to end_query have been processed. This query does not require a call to begin_query. The result is an unsigned 64-bit integer.

PIPE_QUERY_TIMESTAMP_DISJOINT can be used to check the internal timer resolution and whether the timestamp counter has become unreliable due to things like throttling etc. - only if this is FALSE a timestamp query (within the timestamp_disjoint query) should be trusted. The result is a 64-bit integer specifying the timer resolution in Hz, followed by a boolean value indicating whether the timestamp counter is discontinuous or disjoint.

PIPE_QUERY_PRIMITIVES_GENERATED returns a 64-bit integer indicating the number of primitives processed by the pipeline (regardless of whether stream output is active or not).

PIPE_QUERY_PRIMITIVES_EMITTED returns a 64-bit integer indicating the number of primitives written to stream output buffers.

PIPE_QUERY_SO_STATISTICS returns 2 64-bit integers corresponding to the result of PIPE_QUERY_PRIMITIVES_EMITTED and the number of primitives that would have been written to stream output buffers if they had infinite space available (primitives_storage_needed), in this order. XXX the 2nd value is equivalent to PIPE_QUERY_PRIMITIVES_GENERATED but it is unclear if it should be increased if stream output is not active.

PIPE_QUERY_SO_OVERFLOW_PREDICATE returns a boolean value indicating whether a selected stream output target has overflowed as a result of the commands issued between begin_query and end_query. This query can be used with render_condition. The output stream is selected by the stream number passed to create_query.

PIPE_QUERY_SO_OVERFLOW_ANY_PREDICATE returns a boolean value indicating whether any stream output target has overflowed as a result of the commands issued between begin_query and end_query. This query can be used with render_condition, and its result is the logical OR of multiple PIPE_QUERY_SO_OVERFLOW_PREDICATE queries, one for each stream output target.

PIPE_QUERY_GPU_FINISHED returns a boolean value indicating whether all commands issued before end_query have completed. However, this does not imply serialization. This query does not require a call to begin_query.

PIPE_QUERY_PIPELINE_STATISTICS returns an array of the following 64-bit integers: Number of vertices read from vertex buffers. Number of primitives read from vertex buffers. Number of vertex shader threads launched. Number of geometry shader threads launched. Number of primitives generated by geometry shaders. Number of primitives forwarded to the rasterizer. Number of primitives rasterized. Number of fragment shader threads launched. Number of tessellation control shader threads launched. Number of tessellation evaluation shader threads launched. If a shader type is not supported by the device/driver, the corresponding values should be set to 0.

Gallium does not guarantee the availability of any query types; one must always check the capabilities of the Screen first.

Conditional Rendering

A drawing command can be skipped depending on the outcome of a query (typically an occlusion query, or streamout overflow predicate). The render_condition function specifies the query which should be checked prior to rendering anything. Functions always honoring render_condition include (and are limited to) draw_vbo and clear. The blit, clear_render_target and clear_depth_stencil functions (but not resource_copy_region, which seems inconsistent) can also optionally honor the current render condition.

If render_condition is called with query = NULL, conditional rendering is disabled and drawing takes place normally.

If render_condition is called with a non-null query subsequent drawing commands will be predicated on the outcome of the query. Commands will be skipped if condition is equal to the predicate result (for non-boolean queries such as OCCLUSION_QUERY, zero counts as FALSE, non-zero as TRUE).

If mode is PIPE_RENDER_COND_WAIT the driver will wait for the query to complete before deciding whether to render.

If mode is PIPE_RENDER_COND_NO_WAIT and the query has not yet completed, the drawing command will be executed normally. If the query has completed, drawing will be predicated on the outcome of the query.

If mode is PIPE_RENDER_COND_BY_REGION_WAIT or PIPE_RENDER_COND_BY_REGION_NO_WAIT rendering will be predicated as above for the non-REGION modes but in the case that an occlusion query returns a non-zero result, regions which were occluded may be ommitted by subsequent drawing commands. This can result in better performance with some GPUs. Normally, if the occlusion query returned a non-zero result subsequent drawing happens normally so fragments may be generated, shaded and processed even where they’re known to be obscured.

Flushing

flush

PIPE_FLUSH_END_OF_FRAME: Whether the flush marks the end of frame.

PIPE_FLUSH_DEFERRED: It is not required to flush right away, but it is required to return a valid fence. If fence_finish is called with the returned fence and the context is still unflushed, and the ctx parameter of fence_finish is equal to the context where the fence was created, fence_finish will flush the context.

flush_resource

Flush the resource cache, so that the resource can be used by an external client. Possible usage: - flushing a resource before presenting it on the screen - flushing a resource if some other process or device wants to use it This shouldn’t be used to flush caches if the resource is only managed by a single pipe_screen and is not shared with another process. (i.e. you shouldn’t use it to flush caches explicitly if you want to e.g. use the resource for texturing)

Resource Busy Queries

is_resource_referenced

Blitting

These methods emulate classic blitter controls.

These methods operate directly on pipe_resource objects, and stand apart from any 3D state in the context. Blitting functionality may be moved to a separate abstraction at some point in the future.

resource_copy_region blits a region of a resource to a region of another resource, provided that both resources have the same format, or compatible formats, i.e., formats for which copying the bytes from the source resource unmodified to the destination resource will achieve the same effect of a textured quad blitter.. The source and destination may be the same resource, but overlapping blits are not permitted. This can be considered the equivalent of a CPU memcpy.

blit blits a region of a resource to a region of another resource, including scaling, format conversion, and up-/downsampling, as well as a destination clip rectangle (scissors) and window rectangles. It can also optionally honor the current render condition (but either way the blit itself never contributes anything to queries currently gathering data). As opposed to manually drawing a textured quad, this lets the pipe driver choose the optimal method for blitting (like using a special 2D engine), and usually offers, for example, accelerated stencil-only copies even where PIPE_CAP_SHADER_STENCIL_EXPORT is not available.

Transfers

These methods are used to get data to/from a resource.

transfer_map creates a memory mapping and the transfer object associated with it. The returned pointer points to the start of the mapped range according to the box region, not the beginning of the resource. If transfer_map fails, the returned pointer to the buffer memory is NULL, and the pointer to the transfer object remains unchanged (i.e. it can be non-NULL).

transfer_unmap remove the memory mapping for and destroy the transfer object. The pointer into the resource should be considered invalid and discarded.

texture_subdata and buffer_subdata perform a simplified transfer for simple writes. Basically transfer_map, data write, and transfer_unmap all in one.

The box parameter to some of these functions defines a 1D, 2D or 3D region of pixels. This is self-explanatory for 1D, 2D and 3D texture targets.

For PIPE_TEXTURE_1D_ARRAY and PIPE_TEXTURE_2D_ARRAY, the box::z and box::depth fields refer to the array dimension of the texture.

For PIPE_TEXTURE_CUBE, the box:z and box::depth fields refer to the faces of the cube map (z + depth <= 6).

For PIPE_TEXTURE_CUBE_ARRAY, the box:z and box::depth fields refer to both the face and array dimension of the texture (face = z % 6, array = z / 6).

transfer_flush_region

If a transfer was created with FLUSH_EXPLICIT, it will not automatically be flushed on write or unmap. Flushes must be requested with transfer_flush_region. Flush ranges are relative to the mapped range, not the beginning of the resource.

texture_barrier

This function flushes all pending writes to the currently-set surfaces and invalidates all read caches of the currently-set samplers. This can be used for both regular textures as well as for framebuffers read via FBFETCH.

memory_barrier

This function flushes caches according to which of the PIPE_BARRIER_* flags are set.

resource_commit

This function changes the commit state of a part of a sparse resource. Sparse resources are created by setting the PIPE_RESOURCE_FLAG_SPARSE flag when calling resource_create. Initially, sparse resources only reserve a virtual memory region that is not backed by memory (i.e., it is uncommitted). The resource_commit function can be called to commit or uncommit parts (or all) of a resource. The driver manages the underlying backing memory.

The contents of newly committed memory regions are undefined. Calling this function to commit an already committed memory region is allowed and leaves its content unchanged. Similarly, calling this function to uncommit an already uncommitted memory region is allowed.

For buffers, the given box must be aligned to multiples of PIPE_CAP_SPARSE_BUFFER_PAGE_SIZE. As an exception to this rule, if the size of the buffer is not a multiple of the page size, changing the commit state of the last (partial) page requires a box that ends at the end of the buffer (i.e., box->x + box->width == buffer->width0).

PIPE_TRANSFER

These flags control the behavior of a transfer object.

PIPE_TRANSFER_READ
Resource contents read back (or accessed directly) at transfer create time.
PIPE_TRANSFER_WRITE
Resource contents will be written back at transfer_unmap time (or modified as a result of being accessed directly).
PIPE_TRANSFER_MAP_DIRECTLY
a transfer should directly map the resource. May return NULL if not supported.
PIPE_TRANSFER_DISCARD_RANGE
The memory within the mapped region is discarded. Cannot be used with PIPE_TRANSFER_READ.
PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE
Discards all memory backing the resource. It should not be used with PIPE_TRANSFER_READ.
PIPE_TRANSFER_DONTBLOCK
Fail if the resource cannot be mapped immediately.
PIPE_TRANSFER_UNSYNCHRONIZED
Do not synchronize pending operations on the resource when mapping. The interaction of any writes to the map and any operations pending on the resource are undefined. Cannot be used with PIPE_TRANSFER_READ.
PIPE_TRANSFER_FLUSH_EXPLICIT
Written ranges will be notified later with transfer_flush_region. Cannot be used with PIPE_TRANSFER_READ.
PIPE_TRANSFER_PERSISTENT
Allows the resource to be used for rendering while mapped. PIPE_RESOURCE_FLAG_MAP_PERSISTENT must be set when creating the resource. If COHERENT is not set, memory_barrier(PIPE_BARRIER_MAPPED_BUFFER) must be called to ensure the device can see what the CPU has written.
PIPE_TRANSFER_COHERENT
If PERSISTENT is set, this ensures any writes done by the device are immediately visible to the CPU and vice versa. PIPE_RESOURCE_FLAG_MAP_COHERENT must be set when creating the resource.

Compute kernel execution

A compute program can be defined, bound or destroyed using create_compute_state, bind_compute_state or destroy_compute_state respectively.

Any of the subroutines contained within the compute program can be executed on the device using the launch_grid method. This method will execute as many instances of the program as elements in the specified N-dimensional grid, hopefully in parallel.

The compute program has access to four special resources:

  • GLOBAL represents a memory space shared among all the threads running on the device. An arbitrary buffer created with the PIPE_BIND_GLOBAL flag can be mapped into it using the set_global_binding method.
  • LOCAL represents a memory space shared among all the threads running in the same working group. The initial contents of this resource are undefined.
  • PRIVATE represents a memory space local to a single thread. The initial contents of this resource are undefined.
  • INPUT represents a read-only memory space that can be initialized at launch_grid time.

These resources use a byte-based addressing scheme, and they can be accessed from the compute program by means of the LOAD/STORE TGSI opcodes. Additional resources to be accessed using the same opcodes may be specified by the user with the set_compute_resources method.

In addition, normal texture sampling is allowed from the compute program: bind_sampler_states may be used to set up texture samplers for the compute stage and set_sampler_views may be used to bind a number of sampler views to it.

Mipmap generation

If PIPE_CAP_GENERATE_MIPMAP is true, generate_mipmap can be used to generate mipmaps for the specified texture resource. It replaces texel image levels base_level+1 through last_level for layers range from first_layer through last_layer. It returns TRUE if mipmap generation succeeds, otherwise it returns FALSE. Mipmap generation may fail when it is not supported for particular texture types or formats.

Device resets

The state tracker can query or request notifications of when the GPU is reset for whatever reason (application error, driver error). When a GPU reset happens, the context becomes unusable and all related state should be considered lost and undefined. Despite that, context notifications are single-shot, i.e. subsequent calls to get_device_reset_status will return PIPE_NO_RESET.

  • get_device_reset_status queries whether a device reset has happened since the last call or since the last notification by callback.
  • set_device_reset_callback sets a callback which will be called when a device reset is detected. The callback is only called synchronously.

Bindless

If PIPE_CAP_BINDLESS_TEXTURE is TRUE, the following pipe_context functions are used to create/delete bindless handles, and to make them resident in the current context when they are going to be used by shaders.

  • create_texture_handle creates a 64-bit unsigned integer texture handle that is going to be directly used in shaders.
  • delete_texture_handle deletes a 64-bit unsigned integer texture handle.
  • make_texture_handle_resident makes a 64-bit unsigned texture handle resident in the current context to be accessible by shaders for texture mapping.
  • create_image_handle creates a 64-bit unsigned integer image handle that is going to be directly used in shaders.
  • delete_image_handle deletes a 64-bit unsigned integer image handle.
  • make_image_handle_resident makes a 64-bit unsigned integer image handle resident in the current context to be accessible by shaders for image loads, stores and atomic operations.

Using several contexts

Several contexts from the same screen can be used at the same time. Objects created on one context cannot be used in another context, but the objects created by the screen methods can be used by all contexts.

Transfers

A transfer on one context is not expected to synchronize properly with rendering on other contexts, thus only areas not yet used for rendering should be locked.

A flush is required after transfer_unmap to expect other contexts to see the uploaded data, unless:

  • Using persistent mapping. Associated with coherent mapping, unmapping the resource is also not required to use it in other contexts. Without coherent mapping, memory_barrier(PIPE_BARRIER_MAPPED_BUFFER) should be called on the context that has mapped the resource. No flush is required.
  • Mapping the resource with PIPE_TRANSFER_MAP_DIRECTLY.